FloorsCalcFree material planning tool
Vinyl Plank Calculator
Estimate vinyl planks and boxes from room area and actual plank dimensions.
Vinyl plank calculator
Result breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
- Individual plank area
- 2 sq ft
- Planks before allowance
- 60
- Additional planks from allowance
- 6
- Whole planks required
- 66
FloorsCalc
Measurement System
Imperial
Inputs
- Room 1
- 10 ft × 12 ft
- Plank dimensions
- 48 in × 6 in
- Material allowance
- 10%
Result Breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
- Individual plank area
- 2 sq ft
- Planks before allowance
- 60
- Additional planks from allowance
- 6
- Whole planks required
- 66
Planning estimate only.
Confirm product coverage and installation requirements before purchasing.
www.floorscalc.com
Exact calculation method
Plank area in square feet = plank length (in) × plank width (in) ÷ 144. Divide floor area (sq ft) by plank area, apply allowance, and round whole planks and boxes up. Internal calculations retain full precision. Final plank and box quantities are rounded up only when a whole purchase quantity requires it.
Worked example
A 12 ft × 15 ft room is 180 sq ft. A 48 in × 6 in plank is 2 sq ft. At 10%, the result is 99 whole planks; 10 planks per box requires 10 boxes.
Measurement tips
Use room measurements in feet and plank dimensions in inches. Prefer the square-foot coverage printed on the product box when available.
Inputs and results
Enter each rectangular area, choose Imperial or Metric, and adjust the visible material allowance. Product packaging information is optional and should come from the product box, carton, or manufacturer product page. Results separate measured area, allowance, final area, and whole purchase quantities.
Limitations and assumptions
The result does not model stagger rules, plank direction, transitions, or unusable offcuts. Allowance depends on room shape, pattern, cuts, damage, product defects, installer recommendations, and manufacturer instructions.
Use this result for planning only. Verify measurements and order quantities with the product manufacturer or qualified installer.