FloorsCalcFree material planning tool
Hardwood Flooring Calculator
Estimate hardwood area and cartons, with fixed-board counts only when dimensions are known.
Hardwood calculator
Result breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
FloorsCalc
Measurement System
Imperial
Inputs
- Room 1
- 10 ft × 12 ft
- Board dimensions
- 48 in × 6 in
- Material allowance
- 10%
Result Breakdown
- Room 1
- 120 sq ft
- Combined measured area
- 120 sq ft
- Measured area in square yards
- 13.33 sq yd
- Material allowance (10%)
- 12 sq ft
- Final material area
- 132 sq ft
Planning estimate only.
Confirm product coverage and installation requirements before purchasing.
www.floorscalc.com
Exact calculation method
Final hardwood area (sq ft) = measured area × (1 + allowance rate). Cartons = final area (sq ft) ÷ carton coverage (sq ft), rounded up. Internal calculations retain full precision. Final board and carton quantities are rounded up only when a whole purchase quantity requires it.
Worked example
A 15 ft × 16 ft room is 240 sq ft. At 10%, 264 sq ft is required. With 20 sq ft per carton, buy 14 cartons.
Measurement tips
For random-length hardwood, use the square-foot coverage printed on the carton instead of estimating a board count.
Inputs and results
Enter each rectangular area, choose Imperial or Metric, and adjust the visible material allowance. Product packaging information is optional and should come from the product box, carton, or manufacturer product page. Results separate measured area, allowance, final area, and whole purchase quantities.
Limitations and assumptions
Random-length board selection and layout change piece use. Nails, staples, adhesive, barriers, and cost are excluded. Allowance depends on room shape, pattern, cuts, damage, product defects, installer recommendations, and manufacturer instructions.
Use this result for planning only. Verify measurements and order quantities with the product manufacturer or qualified installer.